1 cascadable amplifier 50 to 500 mhz rev. v4 AL7 / smAL7 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support features ? symmetrical clipping: good even - order suppression ? high gain: 13 db (typ.) ? low vswr: < 1.5:1 (typ.) ? fast pulse recovery time: < 50 nsec (typ.) description the AL7 limiting amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. this design uses a schottky diode limiter circuit at the output, and a single stage bipolar transistor feedback amplifier at the output. an rf choke is used for dc power supply decoupling . both to - 8 and surface mount packages are hermetically sealed, and mil - std - 883 environmental screening is available. product image ordering information part number package AL7 to - 8 smAL7 surface mount cAL7 ** sma connectorized absolute maximum ratings parameter absolute maximum storage temperature - 62oc to +125oc case temperature +125oc dc voltage +17 v continuous input power +13 dbm short term input power (1 minute max.) 50 mw peak power (3 sec max.) 0.5 w s series burn - in temperature (case) 125oc thermal data: v cc = +15 v dc parameter rating thermal resistance jc 45oc/w transistor power dissipation p d 0.560 w junction temperature rise above case t jc 25.2oc electrical specifications: z 0 = 50 ? cc = +15 v dc parameter units typical guaranteed 25oc 0o to 50oc - 54o to +85oc* frequency mhz 20 - 550 50 - 500 50 - 500 small signal gain (min) db 13.0 12.0 11.0 gain flatness (max) db 0.2 0.5 0.7 noise figure (max) 50 - 300 mhz 300 - 500 mhz db db 5.0 5.5 6.0 6.5 6.5 7.0 power output @ 1 db comp. (min) dbm - 1.5 - 5.0 - 7.0 output limiting level (max) pin = +10 dbm dbm +0.5 +1.5 +2.5 vswr input / output (max) 1.1:1/<1.5:1 1.7:1/ 2.0:1 1.8:1 / 2.1:1 dc current @ 15 volts (max) ma 54 60 62 * over temperature performance limits for part number cAL7, guaranteed from 0 o c to +50 o c only. ** the connectorized version is not rohs compliant.
2 cascadable amplifier 50 to 500 mhz rev. v4 AL7 / smAL7 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support typical performance curves at +25c
3 cascadable amplifier 50 to 500 mhz rev. v4 AL7 / smAL7 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support outline drawing: to - 8 * outline drawing: surface mount * outline drawing: sma connectorized * ? dimensions are inches (millimeters) 0.015 (0.38) unless otherwise specified. typical performance curves at +25c weight: 1 gram (0.04 oz.) max weight: 1 gram (0.04 oz.) max weight: 19 grams (0.67 oz.) max
4 cascadable amplifier 50 to 500 mhz rev. v4 AL7 / smAL7 m/a - com technology solutions inc. (macom) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. visit www.macom.com for additional data sheets and product information. for further information and support please visit: https://www.macom.com/support m/a - com technology solutions inc. all rights reserved. information in this document is provided in connection with m/a - com technology solutions inc ("macom") products. these materials are provided by macom as a service to its customers and may be used for informational purposes only. except as provided in macom's terms and conditions of sale for such products or in any separate agreement related to this document, macom assumes no liability whatsoever. macom assumes no responsibility for errors or omissions in these materials. macom may make changes to specifications and product descriptions at any time, without notice. macom makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. no license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. these materials are provided "as is" without warranty of any kind, either express or implied, relating to sale and/or use of macom products including liability or warranties relating to fitness for a particular purpose, consequential or incidental damages, merchantability, or infringement of any patent, copyright or other intellectual property right. macom further does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. macom shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. macom products are not intended for use in medical, lifesaving or life sustaining applications. macom customers using or selling macom products for use in such applications do so at their own risk and agree to fully indemnify macom for any damages resulting from such improper use or sale.
|
